Teka Appliance Repair Service
Specialist repairs using genuine Teka spare parts
Laundry
Certified repair for Teka washing machine and tumble dryer. Drum, motor and control board faults resolved at home with genuine spare parts.
Washing machine not draining?
Most Teka laundry faults are repaired in a single visit. Get a free, no-obligation quote today.
Cooling
Same-day response for urgent Teka combi fridge, freezer and fridge side by side breakdowns. Compressor, thermostat and sealed system repairs across West Midlands.
Fridge not cooling? Every minute counts.
Emergency Teka cooling repairs available today. Call now to save your food.
Cooling
Professional Teka fridge side by side repair service in Solihull. Certified technicians with genuine spare parts and a written warranty.
Fridge not cooling? Every minute counts.
Emergency Teka cooling repairs available today. Call now to save your food.
Cooking
Expert diagnostics for all Teka oven, gas hob, induction hob, vitroceramic hob and microwave. Heating elements, thermostats, igniters and control boards repaired on site.
Oven not heating evenly?
Certified Teka kitchen engineers across Solihull. Book a repair and get cooking again.
Cooking
Professional Teka induction hob and vitroceramic hob repair service in Solihull. Certified technicians with genuine spare parts and a written warranty.
Oven not heating evenly?
Certified Teka kitchen engineers across Solihull. Book a repair and get cooking again.
Cooking
Professional Teka microwave repair service in Solihull. Certified technicians with genuine spare parts and a written warranty.
Oven not heating evenly?
Certified Teka kitchen engineers across Solihull. Book a repair and get cooking again.
Cleaning & Extraction
Teka dishwasher and cooker hood repairs. Pump, spray arm, drainage and motor faults fixed at your home with genuine parts.
Dishwasher showing an error code?
No call-out charge when the repair goes ahead. Genuine Teka parts and a written warranty included.
Climate Control
F-Gas certified engineers for Teka air conditioner. Installation, fault diagnosis and refrigerant handling across West Midlands.
Air conditioning not cooling?
Teka climate control repairs by certified engineers. Same-day response available across West Midlands.
Premium Appliances
Specialist repairs for Teka coffee machine. Precision components and brand-specific diagnostics for high-end appliances.
Premium appliance? Premium service.
Specialist Teka premium appliance repairs. Treated with the care your appliance deserves.
Why Teka Appliances Need Specialist Repair
Teka appliances incorporate advanced proprietary systems that require certified engineers with brand-specific training to diagnose and repair correctly.
Teka appliances use integrated electronic diagnostics. Our engineers connect directly to Teka control boards using brand-specific tools to read fault codes and pinpoint issues accurately.
Every repair uses genuine Teka spare parts sourced directly from authorised distributors. Original components ensure compatibility, performance and longevity — backed by a manufacturer warranty.
Teka appliances must meet strict UK safety regulations. Our certified engineers follow Teka service procedures and test every repair to BS EN standards before sign-off.
Many Teka appliances feature Wi-Fi connectivity and smart home integration. Our engineers can diagnose firmware issues, reset connectivity modules and restore remote control functionality.
Common Teka Error Codes
What does the E5 error mean on a Teka dishwasher?
The E5 error on Teka dishwashers indicates a water intake malfunction where the appliance does not take in water correctly. Verify the water tap is open. Check the water intake hose for kinks or blockages. Inspect the inlet filter for debris. If the problem persists after these checks, contact a specialist technician.
What does the Err8 error mean on a Teka washing machine?
The Err8 error on Teka washing machines indicates that water has exceeded the protective level, triggering the overflow protection system. Contact a specialist technician as this error indicates a fault with the water level sensing system or inlet valve that requires professional repair.
What does the E4 error mean on a Teka dishwasher?
The E4 error on Teka dishwashers indicates an overflow detection, meaning potential water leakage has been detected inside the appliance. Turn off the main water supply immediately. Check for visible leaks around the dishwasher. Do not attempt to restart until the source of the leak is identified. Contact a specialist technician for inspection and repair.
What does the E4 error mean on a Teka refrigerator?
The E4 error on Teka refrigerators indicates a defrost temperature probe failure. The probe monitors the evaporator temperature during defrost cycles. Contact a specialist technician as this sensor requires professional testing and likely replacement. This fault may cause excessive frost build-up if not addressed.
What does the Err1 error mean on a Teka washing machine?
The Err1 error on Teka washing machines indicates that the door is not properly shut or the door lock is not engaging. Open and firmly close the door until you hear it click. Ensure no clothing is trapped in the door seal. If the error persists, the door lock mechanism may be faulty and require replacement by a technician.
Frequently Asked Questions
How often should I clean the pump filter on my Teka washing machine?
Clean the pump filter every 2 months to maintain optimal performance. The filter is located behind a cover on the front lower right corner of the machine.
How should I clean my Teka oven if it doesn't have pyrolytic cleaning?
After cooking, wipe the oven interior with a damp cloth while still warm to prevent buildup before it hardens. For deeper cleaning, mix 4 tablespoons of baking soda with water to make a paste, spread it on dirty areas, and leave for a few hours or overnight before wiping clean.
Why is there water remaining inside my Teka dishwasher at the end of the programme?
If water remains after the wash cycle completes, it usually indicates a drainage issue. Check that the drain pipe is not clogged or kinked, and ensure the dishwasher filters are clean.
How do I use the HydroClean steam cleaning function?
HydroClean uses heat and water to clean your oven. Add water to the oven floor or designated container, select the HydroClean programme, and run for approximately 30 minutes. The steam softens food residue for easy wiping.
Why does my Teka induction hob display a pot symbol and not heat?
This symbol appears when the induction system does not detect suitable cookware on the hotplate, or the cookware is not compatible. Ensure you are using ferromagnetic cookware and that it is positioned correctly on the cooking zone.
Areas We Cover in West Midlands
Teka appliance repair service across the ten largest towns in the county
Other Midea Group Brands
Appliances from other brands in the same corporate group are also repaired
Book a Teka Repair
Specialist Teka engineers. No-obligation quote.